22 :Pod Commands; Pod<N>:Display - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual
Oscilloscopes
Hide thumbs
Also See for InfiniiVision 2000 X-Series:
- User manual (296 pages) ,
- User manual (352 pages)
Table of Contents
Advertisement
22
:POD Commands
:POD<n>:DISPlay
Command Syntax
:POD<n>:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
<n> ::= An integer, 1, is attached as a suffix to the command and
POD1 ::= D0-D7
The :POD<n>:DISPlay command turns displaying of the specified group of
channels on or off.
This command is only valid for the MSO models.
N O T E
Query Syntax
:POD<n>:DISPlay?
The :POD<n>:DISPlay? query returns the current display setting of the
specified group of channels.
Return Format
<display><NL>
<display> ::= {0 | 1}
See Also
•
•
•
•
•
•
412
(see
page
790)
defines the group of channels that are affected by the command.
"Introduction to :POD<n> Commands"
":DIGital<d>:DISPlay"
":CHANnel<n>:DISPlay"
":VIEW"
on page 182
":BLANk"
on page 158
":STATus"
on page 179
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 411
on page 245
on page 222
Advertisement
Table of Contents
