Channel:activity - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

33
Obsolete and Discontinued Commands

:CHANnel:ACTivity

Command Syntax
:CHANnel:ACTivity
The :CHANnel:ACTivity command clears the cumulative edge variables for
the next activity query.
The :CHANnel:ACTivity command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :ACTivity command (see
Query Syntax
:CHANnel:ACTivity?
The :CHANnel:ACTivity? query returns the active edges since the last clear,
and returns the current logic levels.
Return Format
<edges>,<levels><NL>
<edges> ::= presence of edges (32-bit integer in NR1 format).
<levels> ::= logical highs or lows (32-bit integer in NR1 format).
A bit equal to zero indicates that no edges were detected at the specified threshold since
N O T E
the last clear on that channel. Edges may have occurred that were not detected because of
the threshold setting.
A bit equal to one indicates that edges have been detected at the specified
threshold since the last clear on that channel.
708
(see page 790)
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
page 151) instead.