Save:image:factors - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

24
:SAVE Commands

:SAVE:IMAGe:FACTors

Command Syntax
:SAVE:IMAGe:FACTors <factors>
<factors> ::= {{OFF | 0} | {ON | 1}}
The :SAVE:IMAGe:FACTors command controls whether the oscilloscope
factors are output along with the image.
Factors are written to a separate file with the same path and base name but with the ".txt"
N O T E
extension.
Query Syntax
:SAVE:IMAGe:FACTors?
The :SAVE:IMAGe:FACTors? query returns a flag indicating whether
oscilloscope factors are output along with the image.
Return Format
<factors><NL>
<factors> ::= {0 | 1}
See Also
•
•
•
•
•
430
(see page 790)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:FORMat"
":SAVE:IMAGe:INKSaver"
":SAVE:IMAGe:PALette"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 426
on page 429
on page 431
on page 432
on page 433