Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 279

16
:FUNCtion Commands
The SPAN, CENTer, VTYPe, and WINDow commands are only useful for
FFT functions. When FFT is selected, the horizontal cursors change from
time to frequency (Hz), and the vertical cursors change from volts to
decibel (dB).
Reporting the Setup
Use :FUNCtion? to query setup information for the FUNCtion subsystem.
Return Format
The following is a sample response from the :FUNCtion? queries. In this
case, the query was issued following a *RST command.
:FUNC:OPER ADD;DISP 0;SOUR1 CHAN1;SOUR2 CHAN2;RANG +8.00E+00;OFFS
+0.0E+00;:FUNC:GOFT:OPER ADD;SOUR1 CHAN1;SOUR2 CHAN2
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 279