Dvm:enable - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

14
:DVM Commands

:DVM:ENABle

Command Syntax
:DVM:ENABle <setting>
<setting> ::= {{OFF | 0} | {ON | 1}}
The :DVM:ENABle command turns the digital voltmeter (DVM) analysis
feature on or off.
Query Syntax
:DVM:ENABle?
The :DVM:ENABle? query returns a flag indicating whether the digital
voltmeter (DVM) analysis feature is on or off.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also
•
•
•
266
(see page 790)
":DVM:SOURce" on page 269
":DVM:MODE" on page 268
":DVM:ARANge" on page 264
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide