Mtest:trigger:source - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

33
Obsolete and Discontinued Commands

:MTESt:TRIGger:SOURce

Command Syntax
:MTESt:TRIGger:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:TRIGger:SOURce command sets the channel to use as the
trigger.
The :MTESt:TRIGger:SOURce command is obsolete and is provided for backward
N O T E
compatibility to previous oscilloscopes. Use the trigger source commands (see
instead.
Query Syntax
:MTESt:TRIGger:SOURce?
The :MTESt:TRIGger:SOURce? query returns the currently selected trigger
source.
Return Format
<source> ::= CHAN<n>
<n> ::= 1 to (# analog channels) in NR1 format
See Also
•
744
(see page 790)
"Introduction to :MTESt Commands"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 379
page 589)