copy
crypto
debug
delete
dir
disconnect
dot1x
enable
erase
exit
filedescr
help
locate
logout
ping
quit
release
reload
rename
renew
script
show
telnet
terminal
test
traceroute
udld
unmount
write
console(config-if-Gi1/0/1)#do a?
privileged EXEC level
arp
Copy files to or from the switch.
Request a crypto certificate.
Configure debug flags.
Delete a file.
Display directory information.
Close active remote session(s).
Initialize dot1x or re-authenticate clients.
Enter into user privilege mode.
Delete a file.
Exit privileged exec mode.
Set a text description for an image file.
Display help for various special keys.
Blink the locator LED.
Exit this session. Any unsaved changes are lost.
Send ICMP echo packets to a specified IP address.
Exit this session. Any unsaved changes are lost.
Release an in-band DHCP assigned address.
Reload stack or a switch in the stack.
Rename a file.
Renew an in-band DHCP assigned address.
Manage and execute configuration scripts.
Show configured settings and operational status.
Open a telnet connection.
Set per session configuration
Test a copper port. Disable EEE modes first!.
Trace route to destination.
UDLD protocol commands.
Flush cache and un-mount a USB device.
Copy running configuration to startup configuration.
! Prompt/command completion from
Mode Commands
1481