Hitachi XP P9500 User Manual page 73

When a failure occurs on one of the nodes in a two-node configuration
¢
running Sun Cluster and the LU cannot be accessed
When the SDS 4.2.1 or SVM 1.0 shared diskset is being used in an
¢
environment without Sun Cluster
#2
Does not support the I/O fencing function.
#3
Does not support linkage with SFVS (Storage Foundation Volume Server).
#4
Does not support the following SVM functions:
Multi-owner disksets
¢
Diskset import
¢
Automatic (top down) volume creation
¢
#5
Does not support the EFI label.
#6
Does not support the following SVM functions:
Handling disks whose capacity is 1 TB or more
¢
Multi-owner disksets
¢
Diskset import
¢
Automatic (top down) volume creation
¢
#7
You must apply MP2 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP, Universal Storage
Platform V/VM, or Virtual Storage Platform storage systems are
connected. Note that the only supported service group type is the failover
service group. The parallel service group and hybrid service group are not
supported.
#8
In a configuration that uses a driver other than the Sun Microsystems
HBA driver (other than the qlc or emlxs driver), the SVM shared diskset
cannot use disks managed by HDLM.
#9
Does not support ZFS.
#10
When the SVM shared diskset uses disks managed by HDLM in a
configuration that uses a driver other than the Sun Microsystems HBA
driver (other than the qlc or emlxs driver), use Sun Cluster device IDs
(logical device files under /dev/did/dsk). The SVM shared diskset cannot
use HDLM logical device names.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-9