Volume Manager Supported By Hdlm - Hitachi XP P9500 User Manual

Platform V/VM, or Virtual Storage Platform storage systems are connected
in a Solaris 10 environment. Note that only the failover and parallel
service groups are supported. The hybrid service group is not supported.
#6
Can be used when the prerequisite Sun Cluster patches are applied.
#7
The following configurations are not supported:
¢
¢

Volume Manager Supported by HDLM

The following shows volume managers that HDLM supports.
• When combining configurations by using VxVM
VxVM 4.1
• When combining configurations by using SDS or SVM
SDS 4.2.1
HDLM-managed boot disks do not support a mirrored boot disk configuration
incorporating a volume manager such as SDS or VxVM. For this reason, you
cannot register an HDLM-managed boot disk in bootdg when using VxVM.
SVM supports the following configuration for HDLM-managed boot disks:
• OS: Solaris 10
• RAID level: Mirroring (no more than three mirrors)
• Cluster: None
#1
When used with the Thunder 9500V series, Lightning 9900V series,
Hitachi USP, Hitachi AMS2000/AMS/TMS/WMS/SMS series, HP XP512, HP
XP48, Universal Storage Platform V/VM, or Virtual Storage Platform
storage systems, the Array Support Library of VxVM is required. If the
Array Support Library of VxVM is not installed, install it before installing
HDLM. For details on how to install the Array Support Library, see the
storage system documentation.
#2
Can be used when Patch 108693-07 or later is applied for Solaris 8.
3-6
A configuration in which Oracle RAC uses the LU that specified the EFI
label.
A configuration in which Oracle RAC uses ZFS.
#1
or VxVM 5.0
#2
, or SVM 1.0
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
#1