Hitachi XP P9500 User Manual page 528

Message
ID
KAPL10754
-I
KAPL10755
-I
KAPL10756
-E
KAPL10757
-E
8-104
Message Text
A user terminated the dlmsetboot
utility. End time = aa...aa
Processing terminated before
completion because a signal was
received. End time = aa...aa
The entered value is invalid. The
dlmsetboot utility processing will
now stop. Execute the utility again.
End time = aa...aa
Parameters are invalid. Execute the
dlmsetboot utility with valid
parameters. Usage: -d
<device_post_migration (cXtYdZ)>
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
Details
Processing of the dlmsetboot
utility has been terminated
because the user replied to the
confirmation with an n response.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
None. For details on the
dlmsetboot utility, see
dlmsetboot Utility for Assisting
Configuration of an HDLM Boot
Disk Environment on page
Details
The process has been terminated
by an operation such as Ctrl+C.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
The dlmsetboot utility terminated
before completion.
Details
Processing will stop because an
incorrect value was entered three
or more times for the message
confirming execution of the
dlmsetboot utility.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
Re-execute the dlmsetboot
utility. For details on the
dlmsetboot utility, see
dlmsetboot Utility for Assisting
Configuration of an HDLM Boot
Disk Environment on page
Details
Invalid parameters have been
specified.
Action
Check the parameters of the
dlmsetboot utility, and then
retry. For details on the
dlmsetboot, see The dlmsetboot
Utility for Assisting Configuration
of an HDLM Boot Disk
Environment on page
The
7-21.
The
7-21.
7-21.