Hitachi XP P9500 User Manual page 511

Message
ID
KAPL10243 A lock error occurred during open
-W processing for the physical path
(aa...aa).
KAPL10244 The definition of the physical path
-I was reconfigured since the same
physical path existed in the
configuration definition file
(dlmfdrv.conf).
KAPL10251 An attempt to retrieve information
-W for the directory aa...aa failed.
Function = readdir, errno = bb...bb
(cc...cc)
KAPL10252 An attempt to read the contents of
-W symbolic link aa...aa failed.
Function = readlink, errno =
bb...bb (cc...cc)
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
device files of the HDLM-managed
sd or ssd device are deleted at
reboot.
Action
After you execute the dlmsetconf
utility, the logical device files of
the HDLM-managed sd or ssd
device are deleted at reboot. To
configure HDLM, enter y if you
want to execute the dlmsetconf
utility, enter n to stop.
Details
An attempt to open a path failed
because an exclusive open is
being executed for another
process.
aa...aa: Physical path
Action
Comply with the following
KAPL10244-I messages.
Details
Information about the same
physical path (the same as the
path where the open processing
failed) was already defined in the
HDLM driver configuration file (/
kernel/drv/dlmfdrv.conf). The
path information was redefined on
the basis of that information.
Action
Remove the physical path that
was shown in the above
KAPL10243-W messages from the
configuration definition file if that
physical path is not needed.
Details
An attempt to collect directory
information has failed.
aa...aa: Directory name
bb...bb: Errno (decimal number)
cc...cc: Errno string
Action
See errno to eliminate the error,
and then retry.
Details
8-87