Hitachi XP P9500 User Manual page 453

Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Message
ID
KAPL04009
The option definition is invalid.
-E
KAPL04010
Could not open the error log file.
-E
KAPL04011
Could not output the error log file.
-E
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
file has been inadvertently
deleted.
Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then
check the option settings.
Use the dlnkmgr set operation
to return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-
install HDLM.For details on the
view operation, see
(Displays Information) on page
6-30. For details on the set
operation, see
set (Sets Up the
Operating Environment) on page
6-16.
Details
HDLM manager cannot start
normally (unable to open the
error log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program
is using the file (for example, the
file is being opened in a text
editor), or whether the error log
file has been inadvertently
deleted.
Details
The log information could not be
output to the error log file /var/
opt/DynamicLinkManager/log/
dlmmgr[1-16].log.
Action
Make sure that the disk has
enough free capacity.
view
8-29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents