Hitachi XP P9500 User Manual page 447

Message
ID
KAPL01107 The load balancing type specified
-I for individual LUs will become
invalid when this operation is
executed. Do you want to execute
the operation anyway? Operation
name = set [y/n]:
KAPL01112 An attempt to connect to the HDLM
-E driver has failed. Operation name =
aa...aa
KAPL01114 The audit log configuration file does
-W not exist. Restart the HDLM
Manager, and execute the "dlnkmgr
view -sys -audlog" command and
check the setting.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
or -chaid parameter was
specified. To collectively place
multiple paths Online, enter y. To
not collectively place them
Online, enter n.
aa...aa: CHA, HBA
Action
If you want to execute the Online
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
Action
If you want to change the load
balancing algorithm for the
system, enter y. If you want to
terminate processing, enter n.
Details
HDLM driver information must be
collected to execute the given
HDLM command, but the HDLM
driver cannot be accessed.
aa...aa: clear, offline, online,
set, or view
Action
Execute the utility for collecting
HDLM error information
(DLMgetras) to collect the error
information, and then contact
your HDLM vendor or
maintenance company if there is
a maintenance contract for HDLM.
For details on the DLMgetras
utility, see The DLMgetras Utility
for Collecting HDLM Error
Information on page
Details
The audit log configuration file
does not exist.
Action
Restart the HDLM Manager, and
execute the "dlnkmgr view -sys
-audlog" command, and then
specify the desired setting by
using the "dlnkmgr set -
audlog" command or the
"dlnkmgr set -audfac"
command as necessary.
7-3.
8-23