Hitachi XP P9500 User Manual page 436

Message
ID
KAPL01051
-I
KAPL01052
-I
KAPL01053
-I
KAPL01054
-W
8-12
Message Text
Because no path has been selected
among the currently displayed
paths, the paths in the Offline(C),
Offline(E), and Online(E) statuses
will be changed to the Online
status. Is this OK? [y/n]:
The currently selected paths will be
changed to the Offline(C) status. Is
this OK? [y/n]:
If you are sure that there would be
no problem when the path is placed
in the Offline(C) status, enter y.
Otherwise, enter n. [y/n]:
During the offline operation
processing of the HDLM command,
Messages
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Explanation
Details
All the paths will be placed
Online because the path
selection parameter is not
specified for the online
operation. To place all the paths
Online, enter y. To cancel the
operation, enter n.
Action
If you want to execute online
processing, enter y. If you want
to terminate processing, enter n.
Before you execute the
processing, be sure to execute
the view operation of the HDLM
command (dlnkmgr) to check the
path status. For details on the
view operation, see
(Displays Information) on page
6-30. For details on the online
operation, see online (Places
Paths Online) on page
Details
The offline operation will be
started. To continue the offline
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute the
offline processing, enter y. If
you want to terminate
processing, enter n. For details on
the offline operation, see
(Places Paths Offline) on page
6-6.
Details
The offline operation will be
started. To continue the offline
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute offline
processing, enter y. If you want
to terminate processing, enter n.
For details on the offline
operation, see offline (Places
Paths Offline) on page
Details
view
6-11.
offline
6-6.