Hitachi XP P9500 User Manual page 435

Message
ID
KAPL01048 Help information cannot be found.
-W Operation name = aa...aa.
KAPL01049 Would you like to execute the
-I operation? Operation name =
aa...aa [y/n]:
KAPL01050 The currently selected paths will be
-I changed to the Online status. Is
this OK? [y/n]:
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
Execute help operation-name of
the HDLM command (dlnkmgr) to
check the parameter value, and
then retry. For details on the
help operation, see
(Displays the Operation Format)
on page 6-4).
Details
The specified operation is not an
operation of the HDLM command.
aa...aa: Specified operation name
Action
Use the help operation of the
HDLM command (dlnkmgr) to
check the operation name. And
then retry. For details on the
help operation, see
(Displays the Operation Format)
on page 6-4.
Details
The clear/set operation will be
started. To continue the
operation, enter y. To cancel the
operation, enter n.
aa...aa: clear, or set
Action
If you want to execute the
operation, enter y. If you want to
terminate processing, enter n. For
details on the clear operation,
see clear (Returns the Path
Statistics to the Initial Value) on
page 6-3. For details on the set
operation, see set (Sets Up the
Operating Environment) on page
6-16.
Details
The online operation will be
started. To continue the online
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute online
processing, enter y. If you want
to terminate processing, enter n.
For details on the online
operation, see online (Places
Paths Online) on page
help
help
6-11.
8-11