Hitachi XP P9500 User Manual page 429

Message
ID
KAPL01006 A necessary parameter is not
-W specified. Operation name =
aa...aa
KAPL01007 A duplicate parameter is specified.
-W Operation name = aa...aa,
parameter = bb...bb
KAPL01008 A necessary parameter value is not
-W specified. Operation name =
aa...aa, parameter = bb...bb
KAPL01009 A parameter value is invalid.
-W Operation name = aa...aa,
parameter = bb...bb, parameter
value = cc...cc, Valid value =
dd...dd
KAPL01012 Could not connect the HDLM
-E manager. Operation name =
aa...aa
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
operation, see help (Displays the
Operation Format) on page
Details
The specified operation does not
contain the necessary parameter.
aa...aa: clear, set, monitor,
offline, or view
Action
Execute help operation-name of
the HDLM command (dlnkmgr) to
check the parameter. Specify the
correct parameter, and then
retry. For details on the help
operation, see help (Displays the
Operation Format) on page
Details
aa...aa: clear, monitor,offline,
online, set, or view
bb...bb: Duplicate parameter
Action
Delete the duplicate parameter,
and then retry.
Details
aa...aa: monitor,offline,
online, set, or view
bb...bb: Parameter name
Action
Specify the parameter value, and
then retry.
Details
aa...aa: monitor,offline,
online, set, or view
bb...bb: Parameter name
cc...cc: Specified parameter value
dd...dd: Specifiable parameter
value range
Action
Specify a correct value for the
parameter, and then retry.
Details
In the view -sys -sfunc
operation, information must be
collected from the HDLM manager
but the manager cannot be
accessed.
6-4.
6-4.
8-5