#1
Key name
Legend:
Optional: If you omit the key name and value, the default is used.
However, for an upgrade installation or re-installation, the previous
license information will be inherited for the licensekeyfile key.
#1
Only one key name and value can be specified on each line.
#2
Specifying an invalid value causes an error.
#3
When you perform a new installation of HDLM or when you upgrade HDLM
after the license has expired, make sure that you have a valid license key
file.
[ENVIRONMENT_SETTINGS] section
This section defines operation information for the HDLM command's set
operation. This section can be omitted. If the section name is not specified or
if no keys are specified in the section, setup by the HDLM command's set
operation is not performed.
For details on the HDLM command's set operation, see
Operating Environment) on page
Table 7-5 Keys that Can Be Defined in the [ENVIRONMENT_SETTINGS]
Section on page 7-32
[ENVIRONMENT_SETTINGS] section.
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
#2
Explanation
n: Do not restart the
system (default).
If you use Sun Cluster,
specify n.
6-16.
describes the keys that can be defined in the
Utility Reference
Required or
optional?
For
upgrade
For new
installatio
installati
n or re-
on
installatio
n
set (Sets Up the
Maximu
m length
(characte
rs)
7-31