Hitachi XP P9500 User Manual page 377

Items Displayed as HBA Port Information on page 6-59
describes the displayed items.
Table 6-18 Items Displayed as HBA Port Information
Item
HBA port ID
HbaID
Port (host port number in hexadecimal) and Bus (bus number in
Port.Bus
hexadecimal), separated by a period
A 16-digit hexadecimal number indicating the WWN information
HBAPortWWN
for an HBA connected to the storage system.
This item is displayed only when you specify the following:
Total I/O count for the displayed paths, indicated by a decimal
IO-Count
number. The maximum value that can be displayed is 2
(4294967295). If the total I/O count reaches the maximum value,
it is reset, and the count is re-started from 0.
Total I/O error count for the displayed paths, indicated by a
IO-Errors
decimal number. The maximum value that can be displayed is 2
- 1 (4294967295). If the total I/O error count reaches the
maximum value, it is reset, and the count is re-started from 0.
Total number of displayed paths, indicated by a decimal number.
Paths
Number of available paths in the displayed paths, indicated by a
OnlinePaths
decimal number. When the value of Paths equals the value of
OnlinePaths, all paths are online. If the value of OnlinePaths is
less than that of Paths, some paths might have an error status, in
which case you should check the status of individual paths and
take appropriate action for any paths that have an error status.
HBA port configuration information. The names of the physical
Physical
device files under the /devices directory are displayed.
Device
Example
# /opt/DynamicLinkManager/bin/dlnkmgr view -hba
HbaID Port.Bus
Physical Device
00000 0000.0000
devices/pci@8,70000/JNI,FCE@2
00001 0002.0000
devices/pci@8,70000/JNI,FCE@3
00002 0001.0000
devices/pci@8,70000/JNI,FCE@4
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
The following shows the subsequent sub-parameters:
-srt pb
Sorts the HBA port information by the host port numbers (Port) and
bus numbers (Bus).
-c
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
IO-Count IO-Errors
71520
425
1425
lists and
Paths OnlinePaths
0 20
100 20
0 20
32
- 1
32
20 /
10 /
20 /
6-59