Hitachi XP P9500 User Manual page 362

Displayed path information
Table 6-12 Displayed Path Information on page 6-44
path information. The following explains the table headings:
• No summary displayed: The user specifies only the -path parameter or
the -path -item parameter.
• Summary displayed: The user specifies the -path -c parameter.
summary
displayed
Paths
OnlinePaths
PathStatus
6-44
Table 6-12 Displayed Path Information
Displayed Item
No
Summary
displayed
Total number of displayed paths, indicated by a decimal
number.
Number of online paths from within the displayed paths,
indicated by a decimal number. When the value of Paths
equals the value of OnlinePaths, then all the paths are
online. If the value of OnlinePaths is less than that of
Paths, some paths might have an error status, in which
case you should check the status of individual paths and
resolve the problem for any paths that have an error
status.
Status of the displayed paths. The displayed status
indicates the following:
•
•
Reduced means that some paths might have an error
status, in which case you should check the status of
individual paths and resolve the problem for any paths that
have an error status.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
Online: All paths are available.
Reduced: Some paths are not available.
describes the displayed