Hitachi XP P9500 User Manual page 291

Figure 4-5 Example of executing the format command
In this example, the shaded portion indicates the path information of the
LU to be managed by HDLM.
2 Edit the HDLM driver unconfiguration definition file (/opt/
.
DynamicLinkManager/config/dlmfdrv.unconf).
Using a text editor, edit the definitions in the HDLM driver unconfiguration
definition file (/opt/DynamicLinkManager/config/dlmfdrv.unconf) for
the LU to be managed by HDLM.
Based on the path information of the LU to be managed by HDLM checked
in step 1 (shaded portion), find the correct LU in the HDLM driver
unconfiguration definition file, and add a hash mark (#) in front of the
LDEV property line corresponding to the LU. Adding the hash mark
specifies that the LU indicated by that LDEV attribute is to be managed by
HDLM.
Figure 4-6 The /opt/DynamicLinkManager/config/dlmfdrv.unconf file
(before editing) on page 4-46 and Figure 4-7 Example of editing the /
opt/DynamicLinkManager/config/dlmfdrv.unconf file on page 4-46 show
examples of editing the HDLM driver unconfiguration definition file (/opt/
DynamicLinkManager/config/dlmfdrv.unconf).
4-45
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))