Hitachi XP P9500 User Manual page 180

# ufsdump 0f - /usr | (cd /mnt1; ufsrestore rf -)
7 Edit the file /etc/vfstab (/mnt0/etc/vfstab) of the boot disk after the
.
migration to change the definition of the swap after the migration to a
metadevice (/dev/md/dsk/d20) and change the definition of /usr after
the migration to a metadevice (/dev/md/ds/d30).
Before change:
/dev/md/dsk/d200 -
/dev/md/dsk/d300 /dev/md/rdsk/d30 /usr ufs 1
After change:
/dev/md/dsk/d20 -
/dev/md/dsk/d30
8 Edit the file /etc/dumpadm.conf (/mnt0/etc/dumpadm.conf) of the boot
.
disk after the migration to change the definition of the dump device
specified for the parameter DUMPADM_DEVICE to the boot disk of the post-
migration environment.
Before change:
DUMPADM_DEVICE=/dev/md/dsk/d200
After change:
DUMPADM_DEVICE=/dev/md/dsk/d20
9 Execute the metaroot command.
.
Use the -R option to specify the mount point of the / (root) file system
after the migration.
For example:
# metaroot -R /mnt0 d10
10 Reboot from the post-migration environment.
.
Figure 3-19 Booting from the post-migration environment on page 3-117
shows the disk that you will boot.
3-116
/dev/md/rdsk/d300 /usr ufs 1
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
swap - no
swap - no
-
no -
-
no -