Convention For Storage Capacity Values - Hitachi XP P9500 User Manual

Example font or
database-name

Convention for storage capacity values

Physical storage capacity values (e.g., drive capacity) are calculated based on
the following values:
1 kilobyte (KB)
1 megabyte (MB)
1 gigabyte (GB)
1 terabyte (TB)
1 petabyte (PB)
1 exabyte (EB)
Logical storage capacity values (e.g., logical device capacity) are calculated
based on the following values:
1 block
1 KB
symbol
This font style marks a placeholder that indicates where
appropriate characters are to be entered in an actual
command.
SD Bold code-font characters indicate the abbreviation for a
command.
Underlined characters indicate the default value.
perm
Square brackets enclose an item or set of items whose
[ ]
specification is optional. An item that is underlined is specified
when other items are omitted.
One of the options enclosed in { } must be specified.
{ }
| Only one of the options separated by a vertical bar can be
specified at the same time.
An ellipsis (...) indicates that the item or items enclosed in ( )
...
or [ ] immediately preceding the ellipsis may be specified as
many times as necessary.
Parentheses indicate the range of items to which the vertical
()
bar (|) or ellipsis (...) is applicable.
A prompt on a command-execution window.
#
Physical capacity unit
Logical capacity unit
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Convention
3
1,000 (10 ) bytes
1,000 KB or 1,000
1,000 MB or 1,000
1,000 GB or 1,000
1,000 TB or 1,000
1,000 PB or 1,000
512 bytes
10
1,024 (2 ) bytes
Preface
Value
2
bytes
3
bytes
4
bytes
5
bytes
6
bytes
Value
xvii