Hitachi XP P9500 User Manual page 169

7 Execute the metaroot command.
.
# metaroot d10
8 Reboot the host.
.
9 When the host starts, check the swap device and dump device. Then
.
execute the mount command to confirm that / (root) and /usr have been
correctly configured.
# swap –l
swapfile
/dev/md/dsk/d20
# dumpadm
Dump content: kernel pages
Dump device: /dev/md/dsk/d20 (swap)
Savecore directory: /var/crash/host
Savecore enabled: yes
# mount
/ on /dev/md/dsk/d10 read/write/setuid/devices/intr/largefiles/
logging/xattr/onerror=panic/dev=154000a on Mon Mar
2009
/usr on /dev/md/dsk/d30 read/write/setuid/devices/intr/
largefiles/logging/xattr/onerror=panic/dev=154001e on Mon Mar
11:00:25 2009
10 Set up a two-mirror configuration of / (root), swap, and /usr.
.
# metainit -f d12 1 1 c8t50060E08000436D1d5s0
# metattach d10 d12
# metainit -f d22 1 1 c8t50060E08000436D1d5s1
# metattach d20 d22
# metainit -f d32 1 1 c8t50060E08000436D1d5s6
# metattach d30 d32
11 Execute the metastat command to confirm that the two-mirror
.
configuration has been correctly configured.
# metastat
d10: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 25190400 blocks (12 GB)
d11: Submirror of d10
State: Okay
Size: 25190400 blocks (12 GB)
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
dev swaplo blocks
85,20 16 8409584 8409584
free
9 11:00:25
9
3-105