Hitachi XP P9500 User Manual page 133

cdrom/cdrom0
4 Perform the installation.
.
If you are not performing an unattended installation of HDLM, execute
¢
either of the following installation commands:
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh
When executing the pkgadd command
# pkgadd -a DVD-ROM-mount-point/HDLM_Solaris/DLManager/
install/update -d DVD-ROM-mount-point/HDLM_Solaris
DLManager
• If you are performing an unattended installation of HDLM, execute
the installux.sh script or the installhdlm utility as shown
below.
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh -f /any-directory/
installation-information-settings-file
When executing the installhdlm utility
# DVD-ROM-mount-point/HDLM_Solaris/hdlmtool/instutil/
installhdlm -f /any-directory/installation-information-
settings-file
If execution of the utility is completed without problems, the KAPL09211-I
message is output.
After confirming that the KAPL09211-I message has been output, execute
the following command to delete the installation-information settings file:
# rm -r /any-directory/installation-information-settings-file
If the restart key is set to n (so that the computer is not restarted) in
the installation-information settings file, go to step 7.
If the restart key is set to y (to restart the computer) in the installation-
information settings file, go to step 8.
5 If the license key file is not found, follow the message about a license key
.
displayed during installation.
If the license needs to be updated and the license key file named /var/
tmp/hdlm_license is not already saved, a message is output asking
whether a user-specified license key file has been saved. Enter 1 if a
user-specified license key file has been saved. Enter 2 to specify a license
key directly.
Note that if any value other than 1 or 2 is entered three times, the
¢
installation is stopped.
If 1 is entered, specify a user-specified license key file with the absolute
path.
Note that if the wrong absolute path is entered three times, the
¢
installation is stopped.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-69