Hitachi XP P9500 User Manual page 124

¢
If 1 is entered, specify a user-specified license key file with the absolute
path.
¢
If 2 is entered, a message that prompts you to enter a license key is
displayed. Enter the license key.
¢
¢
If you interrupt an installation, check whether the /var/opt/
DynamicLinkManager directory exists. If the /var/opt/
DynamicLinkManager directory exists, execute the following command to
delete it:
# rm -rf /var/opt/DynamicLinkManager
14 Execute the following command to check whether HDLM 7.2 has been
.
installed successfully.
Make sure that VERSION appears as 07.2.0.0000.
# pkginfo -l DLManager
CATEGORY:
#
15 Make sure that the logical device file of the sd or ssd device is backed up.
.
After you execute the dlmsetconf utility for creating the HDLM driver
configuration definition file in the next step(s) (either step 16, or steps 16
and 17) and restart the node with the reconfiguration option specified,
the logical device files for the sd or ssd devices to be managed by HDLM
will be deleted. Before you execute the dlmsetconf utility and restart the
node, confirm that these files have been backed up. For details on how to
back up files, see
HDLM on page 3-41
page
16 Execute the following dlmsetconf utility to create the HDLM driver
.
configuration definition file (kernel/drv/dlmfdrv.conf) and the HDLM
driver unconfiguration definition file (/opt/DynamicLinkManager/config/
dlmfdrv.unconf).
3-60
Note that if any value other than 1 or 2 is entered three times, the
installation is stopped.
Note that if the wrong absolute path is entered three times, the
installation is stopped.
When a correct license key is entered, the installation program
displays a message that indicates the license was installed.
Take care that if you enter an incorrect license key three times,
installation stops.
PKGINST: DLManager
NAME: Dynamic Link Manager
system
ARCH: sparc
VERSION: xx.x.x.xxxx
BASEDIR: /
VENDOR:
...
Performing Operations on Devices to Be Managed by
in Preparations for a New Installation of HDLM on
3-41.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))