Hitachi XP P9500 User Manual page 118

¢
14 Execute the dlnkmgr command's view operation to display the status of
.
the programs.
The following shows an example of executing the commands:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Nothing is displayed for Support Cluster even if you are using cluster
software. However, the cluster-support functions are, in fact, operating
without problem.
15 By checking the execution results of the view operation, verify the
.
version of the installed HDLM.
If HDLM Version is 7.2.0-00, the installed version of HDLM is correct.
16 By checking the execution results of the view operation, verify that the
.
programs are running normally.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,
the programs are running normally.
17 In the environment settings files (such as .profile) for root permissions,
.
add /opt/DynamicLinkManager/bin to the PATH environment variable.
When the Bourne shell or Korn shell is used, add the path as shown
below:
When the C shell is used, add the path as shown below:
18 Execute the following command to view the HDevName and iLU columns:
.
3-54
boot -r (at the ok prompt)
x.x.x-xx
x.x.x-xx
WakeupTime
x.x.x-xx
-
PATH=$PATH:/opt/DynamicLinkManager/bin ; export PATH
set path=($path /opt/DynamicLinkManager/bin)
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
: x.x.x-xx
:
: on(extended lio)
:
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 4096
yyyy/mm/dd hh:mm:ss
ElogMem Size