Local Configuration Procedure (Detailed) - Multitech MULTIVOIP MVP-2410 User Manual

Voice over ip gateways

Hide thumbs Also See for MULTIVOIP MVP-2410:

Table of Contents

MultiVOIP User Guide

19. Create a User Default Configuration (optional).

When technical configuration is complete, you will need to configure

the MultiVOIP's inbound and outbound phonebooks. This manual has

separate chapters describing T1 Phonebook Configuration for North-

American-influenced telephony settings and E1 Phonebook

Configuration for Euro-influenced telephony settings.

Local Configuration Procedure (Detailed)

You can begin the configuration process as a continuation of the

MultiVOIP software installation. You can establish your configuration

or modify it at any time by launching the MultiVOIP program from the

Windows Start menu.

1. Check Power and Cabling. Be sure the MultiVOIP is turned on and

connected to the computer via the MultiVOIP's Command Port (DB9

connector at computer's COM port; RJ45 connector at MultiVOIP).

2. Start MultiVOIP Configuration Program. Launch the MultiVOIP

program from the Windows Start menu (from the folder location

determined during installation).

Technical Configuration (Analog/BRI)