Technical Configuration (Analog/BRI)
Field Name
Enable
Console
Messages
Filters (button)
Turn Off Logs
Logs Buttons
GUI
SNMP
SMTP
SysLog Server
Enable
IP Address
Port
Online Statistics
Updation
Interval
"Logs" Screen Definitions
Values
Description
Y/N
Allows MultiVOIP debugging messages to be
read via a basic terminal program like
HyperTerminal ™ or equivalent. Normally,
this should be disabled because it uses
MultiVOIP processing resources. Console
messages are meant for tech support
personnel.
Click to access secondary screen on where
console messages can be included/excluded
by category and on a per-channel basis. (See
the Console Messages Filter Settings screen on
subsequent page.)
Y/N
Check to disable log-reporting function.
Only one of these three log reporting
methods, GUI, SMTP, or SNMP, may be
chosen.
Y/N
User must view logs at the MultiVOIP
configuration program.
Y/N
Log messages will be delivered to the
MultiVoipManager application program.
Y/N
Log messages will be sent to user-specified
email address.
Y/N
This box must be checked if logging is to be
done in conjunction with a SysLog Server
program. For more on SysLog Server, see
Operation & Maintenance chapter.
n.n.n.n
IP address of computer, connected to voip
for n=
network, on which SysLog Server program is
0-255
running.
514
Logical port for SysLog Server. 514 is
commonly used.
integer
Set the interval (in seconds) at which
logging information will be updated.
288
MultiVOIP User Guide