Multitech MULTIVOIP MVP-2410 User Manual page 293

MultiVOIP User Guide
The Supplementary Services fields are described in the tables below.
Field Name
Select
Channel
Call
Transfer
Enable
Transfer
Sequence
Technical Configuration (Analog/BRI)
Supplementary Services Parameter Definitions
Values
1 (MVP-
130/
130FXS)
1-2 (210);
1-4 (410);
1-8 (810)
Y/N
any
phone
keypad
character
293
Description
The channel to be configured is
selected here.
Select to enable the Call Transfer
function in the voip unit.
This is a "blind" transfer and the
sequence of events is as follows:
Callers A and B are having a
conversation.
Caller A wants to put B into contact
with C.
Caller A dials call transfer sequence.
Caller A hears dial tone and dials
number for caller C.
Caller A gets disconnected while
Caller B gets connected to caller C.
A brief musical jingle is played for the
caller on hold.
The numbers and/or symbols that the
caller must press on the phone keypad to
initiate a call transfer.
The call-transfer sequence can be 1 to 4
characters in length using any
combination of digits or characters
(* or #).
The sequences for call transfer, call
hold, and call waiting can be from 1
to 4 digits in length consisting of any
combination of digits 1234567890*#.