Multitech MULTIVOIP MVP-2410 User Manual page 313

MultiVOIP User Guide
In consultation with your VOIP administrator, enter the Gateway Name
determine which protocol you will use (H.323, SIP, or SPP). Then fill in
the IP address, signaling port, and other parameters, as needed. (The
parameters needed for each protocol are different.)
The table below describes all fields in the general PhoneBook
Configuration screen.
PhoneBook Configuration Parameter Definitions
Field Name
Gateway
Name
Use Fast Start
Signaling Port
Gatekeeper /
IP Address
Signaling Port
Gatekeeper
Name
Values Description
Y/N This field allows you to specify
a name for this MultiVOIP.
When placing a call, this name
is sent to the remote
MultiVOIP for display in Call
Progress listings, Logs, etc.
H.323 Parameters
Y/N Enables the H.323 Fast Start
procedure. May need to be
enabled/disabled for
compatibility with third-party
VOIP gateways.
port Default: 1720 (H.323)
number
GateKeeper RAS Parameters
IP address of the GateKeeper.
n.n.n.n,
for n =
0 - 255
Well-known port number for
GateKeepers.
Must match port number of
GateKeeper, 1719.
alpha- Optional. The name of the
numeric GateKeeper with which this
string MultiVOIP is trying to register.
313
T1 PhoneBook Configuration