Multitech MULTIVOIP MVP-2410 User Manual page 235

MultiVOIP User Guide
Field Name
AutoCall/Offhook Alert
Auto Call /
Offhook
Alert
Generate
Local Dial
Tone
Technical Configuration (Analog/BRI)
Voice/Fax Parameter Definitions (cont'd)
Values
Parameters
AutoCall,
Offhook
Alert
Y/N
235
Description
(continued from previous page)
Both functions apply on a channel-by-
channel basis. It would not be
appropriate for either of these functions
to be applied to a channel that serves in
a pool of available channels for general
phone traffic. Either function requires
an entry in the Outgoing phonebook of
the local MultiVOIP and a matched
setting in the Inbound Phonebook of the
remote voip.
Used for AutoCall only. If selected, dial
tone will be generated locally while the
call is being established between
gateways. The capability to generate
dial tone locally would be particularly
useful when there is a lengthy network
delay.