Multitech MULTIVOIP MVP-2410 User Manual page 477

MultiVOIP User Guide
To transfer files using the FTP server functionality in the MultiVOIP,
follow these directions.
1. Establish Network Connection and IP Addresses. Both the
controller PC and the MultiVOIP unit(s) must be connected to the same
IP network. An IP address must be assigned for each.
IP Address of Control PC
IP Address of voip unit #1
IP address of voip unit #n
2. Establish User Name and Password. You must establish a user
name and (optionally) a password for contacting the voip over the IP
network. (When connection is made via a local serial connection
between the PC and the voip unit, no user name is needed.)
As shown above, the username and password can be set in the web
GUI as well as in the Windows GUI.
:
.
477
Operation & Maintenance
____ . ____ . ____ .
____ . ____ . ____ .
: :
. .
____ . ____ . ____ .
____
____
: :
. .
____