Multitech MULTIVOIP MVP-2410 User Manual page 166

Voice over ip gateways

Hide thumbs Also See for MULTIVOIP MVP-2410:

Table of Contents

Technical Configuration (T1/E1)

MultiVOIP User Guide

10. Set ISDN Parameters (if applicable). These parameters are acces-

sible in the T1/E1/ISDN Parameters screen. If your T1 or E1 phone line

is a Primary Rate Interface ISDN line, enable ISDN-PRI and set it for the

particular implementation of ISDN that your telco uses. The ISDN

types supported by the digital MultiVOIP units (at press time) are listed

below, organized by country.