Multitech MULTIVOIP MVP-2410 User Manual page 79

MultiVOIP User Guide
5. Open the HyperTerminal program.
6. Use HyperTerminal to receive and record console messages from the
MultiVOIP unit. To do so, set up HyperTerminal as follows (setup
shown is for Windows NT4; details will differ slightly in other MS
operating systems):
7. Make VOIP call.
for digital MultiVOIPs
(MVP-2410/3010)
Make call from an extension
of the local PBX.
In the upper toolbar of the HyperTerminal screen, click on
the Properties button.
In the "Connect To" tab of the Connection Properties
dialog box, click on the Configure button.
In the next dialog box, on the "General" tab, set "Maximum
Speed" to 115200 bps.
On the "Connection" tab, set connection preferences to:
Data bits : 8
Parity : none
Stop bits : 1
Click OK twice to exit settings dialog boxes.
Quick Start Instructions
for analog MultiVOIPs
(MVP-130/130FXS
& MVP-210/410/810)
Make call on a local phone
line accessing PSTN directly
or through key system
79