Multitech MULTIVOIP MVP-2410 User Manual page 117

Voice over ip gateways

Hide thumbs Also See for MULTIVOIP MVP-2410:

Table of Contents

MultiVOIP User Guide

8. A completion screen will appear.

Click Finish.

9. When setup of the MultiVOIP software is complete, you will be

prompted to run the MultiVOIP software to configure the VOIP.

Software installation is complete at this point. You may proceed with

Technical Configuration now or not, at your convenience.

Technical Configuration instructions are in the next two chapters of

this manual: Chapter 5 for T1/E1 MultiVOIP units and Chapter 6 for

Analog MultiVOIP units.

Software Installation