Multitech MULTIVOIP MVP-2410 User Manual page 164

Technical Configuration (T1/E1)
ISDN Parameters
Field Name
Enable
ISDN-PRI
Terminal/
Network
Country
Operator
Note on
Country &
Operator
options.
E1 Parameter Definitions (cont'd)
Values
Y/N
either
"Terminal" or
"Network"
see table, later
this chapter
see table, later
this chapter
__
164
MultiVOIP User Guide
Description
If digital connection is ISDN-
PRI type, this box should be
checked. When ISDN is
enabled, the "CAS Protocols"
field is grayed out (ISDN has its
own signaling method).
When "Terminal" is selected, it
indicates that the MultiVOIP
should emulate the subscriber
(terminal) side of the digital
connection. When "Network"
is selected, it indicates that the
MultiVOIP should emulate the
central office (network) side of
the digital connection.
Setting used for MultiVOIP
must be opposite to the setting
used in the PBX. For example,
if the PBX is set to "Terminal,"
then the MultiVOIP must be set
to "Network."
Country in which MultiVOIP is
operating with ISDN.
Indicates phone switch
manufacturer/model or refers
to telco so as to specify the
switching system in question.
ISDN is implemented
somewhat differently in
different switches.
[ISDN implementation options
are shown, arranged by
country, in a table below – soon
after E1 Parameter Definitions.]