Summary of Contents for Multitech MultiVOIP MVP410ST
Page 1
MultiVOIP ISDN BRI Voice / Fax over IP Networks MVP410ST MVP810ST Cabling Guide...
Page 2
Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Check Multi-Tech’s web site for current versions of our product documentation.
When the battery starts to weaken, the date and time may be incorrect. If the battery fails, the board must be sent back to Multi-Tech Systems for battery replacement. Warning: There is danger of explosion if the battery is incorrectly replaced.
Page 4
Only connect like circuits. In other words, connect SELV (Secondary Extra Low Voltage) circuits to SELV circuits and TN (Telecommunications Network) circuits to TN circuits. • To reduce the risk of shock, all access doors should be closed during normal operation of the equipment. • Multi-Tech Systems, Inc.
Page 5
MVP-410ST/810ST Package Contents • One MultiVOIP MVP410ST or MVP810ST • One power cord • One Command Cable (DB25-to-DB9 connectors) • Two rack mount brackets and four mounting screws • One printed Cabling Guide • One MultiVOIP CD containing software and user documentation.
Page 6
MultiVOIP ISDN/BRI Cabling Guide Quick Hookup for MVP410ST & MVP810ST Multi-Tech Systems, Inc.
VOIP Configuration When the cabling connections above have been made, go to the “Quick Start Instructions” chapter of the User Guide (on your MultiVOIP CD) for detailed instructions about configuration. Multi-Tech Systems, Inc. MultiVOIP ISDN/BRI Cabling Guide Ground Wire: Size 18AWG...
Need help?
Do you have a question about the MultiVOIP MVP410ST and is the answer not in the manual?
Questions and answers