Multitech MULTIVOIP MVP-2410 User Manual page 444

Operation and Maintenance
Field
Name
Select BRI
Interface
Layer 1 Interface
Status
State
Loss Of
Framing
Loss of
Sync
ISDN BRI Statistics: Field Definitions
Values
ISDNn
For n=1-2 (410ST)
For n-1-4 (810ST)
inactive (F1),
sensing (F2),
deactivated (F3),
awaiting signal (F4),
(F5),
identifying input
synchronized (F6),
activated (F7),
lost framing (F8),
deactive (G1),
pending
activation (G2),
active (G3),
pending
deactivation (G4)
F1-F8
(for Terminal
mode ports),
G1-G4 (for Network
mode ports)
integer
integer
444
MultiVOIP User Guide
Description
In this field, you can choose the ISDN
port for which you want to view the
status. The 410ST has two ISDN –BRI
ports (or "interfaces"); the 810ST has
four ISDN-BRI ports (or "interfaces").
Each interface has two channels.
Shows the current Layer 1 status of the
ISDN connection. Each status
description (inactive, sensing, etc.)
corresponds to a particular "state" label
(F1-F8 and G1-G4).
Shows the I.430 state name for Layer 1.
An "F" state name indicates this port is
in Terminal mode (F1-F8), as set in the
ISDN BRI Parameters
A "G" state name indicates that this
port is in Network mode (G1-G4), as set
ISDN BRI Parameters
in the
Shows the number of lost-framing
events on the ISDN physical layer.
Shows the number of lost-
synchronization events on the ISDN
physical layer.
screen.
screen.