Multitech MULTIVOIP MVP-2410 User Manual page 193

MultiVOIP User Guide
Field Name
Call Hold
Enable
Hold
Sequence
Call Waiting
Enable
Retrieve
Sequence
Supplementary Services Definitions (cont'd)
Values Description
Select to enable Call Hold function in
Y/N
voip unit.
Call Hold allows one party to
maintain an idle (non-talking)
connection with another party while
receiving another call (Call Waiting),
while initiating another call (Call
Transfer), or while performing some
other call management function.
The numbers and/or symbols that the
phone
caller must press on the phone
keypad
keypad to initiate a call hold.
characters
The call-hold sequence can be 1 to 4
characters in length using any
combination of digits or characters
(* or #).
Select to enable Call Waiting function
Y/N
in voip unit.
The numbers and/or symbols that the
phone
caller must press on the phone
keypad
keypad to initiate retrieval of a
characters,
waiting call.
two
The call-waiting retrieval sequence
characters
can be 1 to 4 characters in length
in length
using any combination of digits or
characters
(* or #).
This is the phone keypad sequence
that a user must press to retrieve a
waiting call. Customize-able.
Sequence should be distinct from
sequence that might be used to
retrieve a waiting call via the PBX or
PSTN.
193
Technical Configuration (T1/E1)