Multitech MULTIVOIP MVP-2410 User Manual page 163

MultiVOIP User Guide
Field Name
Detect Flash
Hook
Detection Time
Generation
Time
Technical Configuration (T1/E1)
E1 Parameter Definitions (cont'd)
Values
Y/N
100 – 1500
milliseconds
100 – 1500
milliseconds
163
Description
This setting determines whether
or not the MultiVOIP responds
to hook-flash signals.
Minimum hook-flash time that
will be interpreted as a valid
flash by the MultiVOIP.
In some systems, a MultiVOIP
might receive a hook-flash
signal from an upstream device
(a PBX, voip or other device)
and must replicate it to a
downstream device. This
parameter determines the
duration of the hook-flash
signal that is passed to a
downstream device.