Multitech MULTIVOIP MVP-2410 User Manual page 396

E1 Phonebook Configuration
VOIP Dir #
-OR-
Destination
Pattern
0207
xxx
xxxx
0208
xxx
xxxx
Note 1. The "x" is a wildcard character.
Note 2. By specifying "Channel 0," we instruct the MVP3010 to
choose any available data channel to carry the call.
Note 3. Note that Site F key system has only 30 extensions
(x7400-7429). This destination pattern (018226374) actually
directs calls to 402-263-7430 through
402-263-7499 into the key system, as well.
This means that such calls, which belong on the PSTN, cannot be
completed. In some cases, this might be inconsequential because
an entire exchange (fully used or not) might have been reserved
for the company or it might be unnecessary to reach those
numbers. However, to specify only the 30 lines actually used by
the key system, the destination pattern 018226374 would have to
be replaced by three other destination patterns, namely
0182263740, 0182263741, and 0182263742. In this way, calls to
0182-263-7430 through 0182-263-7499 would be properly directed
to the PSTN. In the Site D outbound phonebook, the 30 lines are
defined exactly, that is, without making any adjacent phone
numbers unreachable through the voip system.
Phone Book for Analog VOIP Host Unit (Site B)
IP Address
200.2.9.9
200.2.9.9
MultiVOIP User Guide
(continued)
Channel Comments
0 Gives remote voip users
(Note 2.) access to phone numbers
in 0207 area code (Inner
London) in which Site D
is located.
0 Gives remote voip users
(Note 2.) access to phone numbers
in 0208 area code (Outer
London) for which calls
are local from Site D
(Inner London).
396