Table of Contents
Advertisement
5.
Click Finish.
Finishing Configuration
Complete the following steps after you have finished entering the basic settings.
1.
To save and apply the settings, click Save and Restart near the top of the left sidebar. The device restarts.
2.
After restart, log back into the AEP interface. On the Dashboard under Cellular, the PPP state displays
Link is Up. You may have to wait for short time.
3.
To configure a LoRa Network, refer to
Using DeviceHQ for Device Management
DeviceHQ is a cloud-based device management tool for remote monitoring, upgrades, and configuration AEP
devices. For information on creating and using a DeviceHQ account, go to the
http://www.multitech.net/developer/software/devicehq/.
®
TM
MultiConnect
Conduit
AP MTCAP-LNA3-915 and MTCAP-915 User Guide
Getting Started with LoRa
GETTING STARTED WITH AEP MODELS
25
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiConnect Conduit AP MTCAP-LNA3-915 and is the answer not in the manual?