Cabling Your Multivoip; Cabling Procedure - Multitech MultiVOIP MVP110 Quick Start Manual

Cabling Your MultiVOIP

Cabling your MultiVOIP involves making the proper Power,
Command Port, and Ethernet connections. Figure 6 shows the
back panel connectors and the associated cable connections.
The Cabling Procedure section provides step-by-step
instructions for cabling your MultiVOIP.

Cabling Procedure

1. Using the supplied cable, connect the power supply to a
live AC outlet, then plug the power supply into the MVP
110 as shown in Figure 3.
Power Connection
Figure 3. Cable Connections
2. Connect the MVP 110 to a PC using the RJ-45 to DB9
(female) cable provided with your unit. Plug the RJ-45 end
of the cable into the Command port of the MVP 110 and
connect the other end to the PC's serial port (Figure 3).
3. Connect a network cable to the Ethernet 10Base-T
connector on the back of the MVP 110. Connect the other
end of the cable to your network.
4. If you are connecting a station device such as an analog
telephone, fax machine, or Key Telephone System (KTS)
Cabling
FXS
Command Port Connection
Hub
Network Connection
9