Multitech MULTIVOIP MVP-2410 User Manual page 294

Technical Configuration (Analog/BRI)
Field Name
Call Hold
Enable
Hold
Sequence
Call Waiting
Enable
Retrieve
Sequence
Supplementary Services Definitions (cont'd)
Values Description
Select to enable Call Hold function in
Y/N
voip unit.
Call Hold allows one party to
maintain an idle (non-talking)
connection with another party while
receiving another call (Call Waiting),
while initiating another call (Call
Transfer), or while performing some
other call management function.
The numbers and/or symbols that the
phone
caller must press on the phone
keypad
keypad to initiate a call hold.
characters
The call-hold sequence can be 1 to 4
characters in length using any
combination of digits or characters
(* or #).
Select to enable Call Waiting function
Y/N
in voip unit.
The numbers and/or symbols that the
phone
caller must press on the phone
keypad
keypad to initiate retrieval of a
characters,
waiting call.
two
The call-waiting retrieval sequence
characters
can be 1 to 4 characters in length
in length
using any combination of digits or
characters
(* or #).
This is the phone keypad sequence
that a user must press to retrieve a
waiting call. Customize-able.
Sequence should be distinct from
sequence that might be used to
retrieve a waiting call via the PBX or
PSTN.
294
MultiVOIP User Guide