Multitech MULTIVOIP MVP-2410 User Manual page 173

MultiVOIP User Guide
Field Name
Frequency 1
Frequency 2
Gain 1
Gain 2
Technical Configuration (T1/E1)
"Regional Parameter" Definitions
Values
frequency in
Hertz
frequency in
Hertz
gain in dB
+3dB to –31dB
and "mute"
setting
gain in dB
+3dB to –31dB
and "mute"
setting
173
Description
Lower frequency of pair.
Higher frequency of pair.
Amplification factor of lower
frequency of pair.
This figure describes amplification
that the MultiVOIP
applies to outbound tones entering
the MultiVOIP at
the T1 port. Default: -16dB
Amplification factor of higher
frequency of pair.
This figure describes amplification
that the MultiVOIP
applies to outbound tones entering
the MultiVOIP at
the T1 port. Default: -16dB