E1 Telephony Parameters (For Mvp3010) - Multitech MULTIVOIP MVP-2410 User Manual

Technical Configuration (T1/E1)

E1 Telephony Parameters (for MVP3010)

The following parameters must be known about the PBX or telco
central office equipment to which the E1 MultiVOIP will connect:
E1 Phone Parameters
Ask phone company or
PBX maintainer.
• Which frame format is used?
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
• Which line coding is used?
• Pulse shape level?: (most commonly 0 to 40 meters)
Write down the values for these E1 parameters. You will need to enter
these values in the "T1/E1 Parameters" screen in the Configuration
section of the MultiVOIP software.
E1 Telephony Parameters:
Record for this VOIP Site
MultiFrame w/ CRC4 modified
or clocking? _________________
internal external
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
MultiVOIP User Guide
Info needed to operate:
MVP3010
Double Frame
MultiFrame w/ CRC4
___ or
AMI HDB3
126
_____
_____
_____
___