Multitech MULTIVOIP MVP-2410 User Manual page 250

Technical Configuration (Analog/BRI)
Field Name
FXO Disconnect On (cont'd)
Disconnect
Tone Sequence
Silence
Detection
Silence Timer
in seconds
Disconnect on
Call Progress
Tone
Ring Count,
FXO
FXO Interface: Parameter Definitions (cont'd)
Values
st
1 tone pair
+
nd
2 tone pair
High Tones 1209Hz 1336Hz 1447Hz 1633Hz
One-Way or
Two-Way
integer value
Y/N
1-99
250
MultiVOIP User Guide
Description
These are DTMF tone pairs.
Values for first tone pair are:
*, #, 0, 1-9, and A-D.
Values for second tone pair are:
none, 0, 1-9, A-D, *, and #.
The tone pairs 1-9, 0, *, and #
are the standard DTMF pairs
found on phone sets. The tone
pairs A-D are "extended
DTMF" tones, which are used
for various PBX functions.
DTMF Tone Pairs
2
1 3
5
4 6
8
7 9
0
#
*
Disconnection to be triggered
by silence in one direction only
or in both directions
simultaneously.
Duration of silence required to
trigger disconnection.
Allows call on FXO port to be
disconnected when a PBX
issues a call-progress tone
denoting that the phone station
on the PBX that has been
involved in the call has been
hung up.
Number of rings required
before the MultiVOIP answers
the incoming call.
Low Tones
A 697Hz
B 770Hz
C 852Hz
D 941Hz