Multitech MULTIVOIP MVP-2410 User Manual page 169

MultiVOIP User Guide
The SNMP Parameter fields are described in the table below.
Field Name
Enable SNMP
Agent
Trap Manager Parameters
Address
Community
Name
Port Number
Community
Name 1
Permissions
Community
Name 2
Permissions
SNMP Parameter Definitions
Values
Y/N
4 places; n.n.n.n
n = 0-255
--
162
Length = 19
characters (max.)
Case sensitive.
Read-Only,
Read/Write
Length = 19
characters (max.)
Case sensitive.
Read-Only,
Read/Write
169
Technical Configuration (T1/E1)
Description
Enables the SNMP code in the
MultiVOIP
firmware of the
must be enabled for the
to communicate with and be
controllable by the
MultiVoipManager software.
Default: disabled
IP address of MultiVoipManager
PC.
A "community" is a group of VOIP
endpoints that can communicate
with each other. Often "public" is
used to designate a grouping where
all end users have access to entire
VOIP network. However, calling
permissions can be configured to
restrict access as needed.
The default port number of the
SNMP manager receiving the traps
is the standard port 162.
First community grouping.
If this community needs to change
MultiVOIP
settings, select
Read/Write. Otherwise, select
Read-Only to view settings.
Second community grouping
If this community needs to change
MultiVOIP settings, select
Read/Write. Otherwise, select
Read-Only to view settings.
. This
MultiVOIP