Multitech MULTIVOIP MVP-2410 User Manual page 373

MultiVOIP User Guide
PhoneBook Configuration Parameter Definitions
Field Name
Single Port Protocol (SPP)
[continued]
Client Options
Registrar IP
Address
Registrar
Port
Registrar Options
Keep Alive
(in sec.)
Proxy/NAT Device
Parameters
Behind
Proxy/NAT
device
Proxy/NAT
Device
Parameters –
Public IP
Address
(cont'd)
Values Description
Client Option fields are active
only in registrar/client mode
and only for client voip units.
This is the IP address of the
n.n.n.n
registrar voip to which this
client is assigned. (Default
value = 0.0.0.0; effectively,
there is no useful default
value.)
This is the port number of the
1-64000
registrar voip to which this
client is assigned. (Default port
number = 10000.)
Registrar Option fields are
active only in registrar/client
mode and only for registrar
voip units.
Time-out duration before a
30 - 300
registrar will unregister a
client that does not send its
"I'm here" signal. Timeout
default = 60 seconds.
Enables MultiVOIP (running
Y/N
in SPP Registrar mode) to
operate 'behind' a proxy/NAT
device (NAT = Network
Address Translation).
The public IP address of the
n.n.n.n
proxy/NAT device which the
where
MultiVOIP is behind.
n=0-255
373
E1 PhoneBook Configuration