Multitech MULTIVOIP MVP-2410 User Manual page 245

MultiVOIP User Guide
FXS Loop Start Interface: Parameter Definitions (cont'd)
Field Name
Generation
Detection
Range
Pass Through
Enable
Caller ID Type
Caller ID
enable
Values
Flash Hook Options fields
--
. and
Min
for
50 - 1500
milliseconds
Y/N
Caller ID fields
Bellcore
Y/N
245
Technical Configuration (Analog/BRI)
Description
not applicable to FXS interface
.,
Max
For a received flash hook to be
regarded as such by the
MultiVOIP, its duration must
fall between the minimum and
maximum values given here.
When enabled, this parameter
creates an open audio path
through the MultiVOIP.
If the Pass-Through feature is
enabled, the AutoCall feature
must be enabled for this voip
channel in the Voice/Fax
Parameters screen.
The MultiVOIP currently
supports only one
implementation of Caller ID.
That implementation is Bellcore
type 1 with Caller ID placed
between the first and second
rings of the call.
Caller ID information is a
description of the remote
calling party received by the
called party. The description
has three parts: name of caller,
phone number of caller, and
time of call. The 'time-of-call'
portion is always generated by
the receiving MultiVOIP unit
(on FXS channel) based on its
date and time setup.